(Created page with " == Abstract == == Full document == <pdf>Media:Draft_Casals_976121262-8530-document.pdf</pdf>") |
|||
| (One intermediate revision by one other user not shown) | |||
| Line 2: | Line 2: | ||
== Abstract == | == Abstract == | ||
| − | + | Basic validation and verification of the laminate's analysis models implemented in a FEA software must consider the assessment of the membrane and bending stiffness characteristics and the membrane and bending strength analysis [1]. The present document addresses the first of these issues (i.e. the membrane and bending stiffness characteristics) to assess the behavior of the classical lamination theory (CLT) implemented in RamSeries. To this aim, the benchmark problems provided in [1] are reproduced. The stiffness matrix characteristics obtained with RamSeries are compared againsts the results reported in [1]. | |
| + | The examples presented here comprise laminates that exhibit no coupling in the stiffness matrix with both, isotropic and orthotropic plies. A number of tests with stacking sequences leading to different forms of coupling are also presented. | ||
== Full document == | == Full document == | ||
<pdf>Media:Draft_Casals_976121262-8530-document.pdf</pdf> | <pdf>Media:Draft_Casals_976121262-8530-document.pdf</pdf> | ||
Latest revision as of 11:04, 25 October 2018
Abstract
Basic validation and verification of the laminate's analysis models implemented in a FEA software must consider the assessment of the membrane and bending stiffness characteristics and the membrane and bending strength analysis [1]. The present document addresses the first of these issues (i.e. the membrane and bending stiffness characteristics) to assess the behavior of the classical lamination theory (CLT) implemented in RamSeries. To this aim, the benchmark problems provided in [1] are reproduced. The stiffness matrix characteristics obtained with RamSeries are compared againsts the results reported in [1]. The examples presented here comprise laminates that exhibit no coupling in the stiffness matrix with both, isotropic and orthotropic plies. A number of tests with stacking sequences leading to different forms of coupling are also presented.
Full document
